Original Gorilla Glue
Original Gorilla Glue
Original Gorilla Glue
  • Load image into Gallery viewer, Original Gorilla Glue
  • Load image into Gallery viewer, Original Gorilla Glue
  • Load image into Gallery viewer, Original Gorilla Glue

Original Gorilla Glue

Regular price
$11.75
Sale price
$11.75
Regular price
Sold out
Unit price
per 
Tax included.

The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. The water activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anything making Gorilla Glue your solution for almost any project or repair.

Available in 3 Sizes : 

59ml - GG41001

118ml - GG41002

236ml - GG41003

 

 

APPLICATION TEMPERATURE –Above 4° C, best at room temperature

SERVICE TEMPERATURE – 4° to 93° C

OUTDOOR – Yes

MOISTURE RESISTANT – Waterproof

PAINTABLE –Yes – Can be painted with oil-based and spray. Acrylic/latex and stains require sanding

SANDABLE – Yes

STAINABLE – Yes – Will require sanding

EXPANDS WHEN CURED – Yes

CURED COLOR – Tan

TECHNICAL STANDARDS –ANSI/HPVA Type I

STORAGE TIPS  –Store in a cool, dry location. Avoid laundry rooms, under sinks, and kitchen cabinets.

GAP FILLING – No

 

  1. Prepare and Dampen the Surfaces

    If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first. To open a bottle larger than 59ml, cut the tip of the nozzle where it comes up to a point and starts to indent. The cap is attached to the side of the nozzle.

    Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.

    Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.

  2. Evenly Apply Gorilla Glue Onto the Dry Surface

    Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitiser. If you are predisposed to skin reactions, please take the extra precaution.

    If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.

  3. Clamp the Two Surfaces Together Tightly

    Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.

  4. Clean up

    If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. The dried glue will not damage tools.

  5. Storage Tips

    After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. For 59ml bottles, tightly replace the lid after wiping clean and store in a cool, dry place. For bottle sizes 118ml and larger, we suggest squeezing excess air out of the bottle. While still squeezing, tightly replace the cap and then store in a cool, dry place. This helps eliminate moisture in the bottle.